SET OF MATERIALS FOR SUMMER HOUSES



1. LOG-PART-PREFABRICATED
1.1. Material of squared log - Pine or Spruce, Regular (humidity 18±2%) or Glued (humidity 16±2%)
1.2. Grooved, marked, holes for tightening bolts drilled.
1.3. Means for instalment - tightening bolts.
1.6. Thickness of the log-walls: 28 ... 70 mm
1.7. Surface - planed

2. FLOORING
2.1 Floor boards. Tongue and V-grooved, 20-32 mm x 95-135mm
2.2. Floor joists 45 x 95/145 mm, c=600 mm
2.7. Skirting boards

3. CEILING
3.1. Floor boards. Tongue and V-grooved, 20-32 x 95-135 mm
3.4. Ceiling beams 45 x 135-195 mm, c=~800 mm
3.5. Ceiling skirting list
3.6. Floor skirting list

4. ROOF
4.1. Lathwork for tiling
4.2. Additional list for roof ventilation
4.6. Rafters, 45 x 135-195, c=600 mm or 70 x 135-195 mm, c=~700...800 mm
4.8. Ceiling panelling (internal). Tongue and V-grooved, s= 14-20 mm
4.9. Ceiling skirting list
4.10.Purlins - stack up logs or laminated beams
4.12.Boards above rafters on eaves, s=~19 mm
4.13.Boards between rafters (on eaves),
4.14.Boarding for eaves

6. TERRACES and BALCONY
6.1. Floorboards, 28-32 x 95-135 mm, impregnated
6.2. Floor joists, 45 x 95/145 mm, c=600 mm, impregnated
6.3. Banister

7. MATERIALS FOR FRAMEWORK WALLS
7.1. Framework, 45 x 95 mm, c=600 mm
7.2. Panelling: (not in "wet" rooms)
7.2.1. Tongue and V-grooved, s=14 mm

9. WINDOWS
9.1. Single inwards opening frames made from three-layered glued timber
9.3. Glazing – 1 simple 4 mm glass or 2x heat-insulating glass packet (4 + 4, c=18 mm)
9.4. Fittings
9.5. Frame boards around casing
9.6. Mol ding boards, internal and external

10. DOORS
10.1. External doors - wooden doors, glassed, 2x heat-insulating glass packet (4 + 4, c=18 mm), lock.
10.2. Internal doors - wooden doors, pine, hinges, lock and handles
10.3. Terrace and balcony doors - 2x heat-insulating glass packet (4 + 4, c=18 mm,).
10.6. Frame boards around casing, s=18 mm
10.7. Mol ding boards, internal and external, 18 x 120/140 mm

11. STAIRS
- Staircase with handrails and railing


FOR ADDITIONAL PRICE CAN BE DELIVERED:
Materials for Additional Insulation (internal) of external log walls:
- Battens 45 x 95/120 mm, c=600 mm
- Sliding brackets
- Paneling, Log paneling, 18-20 x 95-135 mm (not in "wet" rooms)

Roof boards:
- Raw match-boarding, s=19 mm

Sandwich system
We send on requirement insulated walls with normal thickness of  external wall
+ cavity filled with rock or glass wool
+ internal paneling of profiles 18mm thick
The thermo insulation of the sandwich system in 50 mm of insulating material + 18 mm of panels is four time more than the one not insulated.
Inside it is not possible to see the sandwich system because panels have the same measurement of the external walls boards.
Therefore it is possible to finish the internal side walls with gypsum panels witch can be painted or covered with tapestry.



Sauna materials:
- Carcass for bench (pine)
- Paneling for bench (aspen)
- Carcass for paneling (pine)
- Paneling for walls and ceiling (aspen)